JB Fashions - Spectacle frame manfacturers

DiveOptx

Details

Select to enlarge

Options available

Product description:

DIVEOPTX allows divers a quick and economical solution to adding magnification in dive masks, so reading gauges, watch or camera settings is possible. If you have had difficulty seeing details underwater, DiveOptx Lenses are the solution.

Powers available:

  • +1.25            
  • +1.50            
  • +1.75            
  • +2.00            
  • +2.50            
  • +3.00       

Instructions to Apply OPTX 20/20 Lenses to any type of glasses, or safety or dive mask. 

  1. Make sure your hands are very clean and free of oils. Wash the OPTX 20/20 lenses and your glasses with soap and water.
  2. Put a small drop of water on the inside of the lenses of your glasses or mask
    (where the OPTX 20/20 lenses will be applied)
  3. Take one OPTX lens between your thumb and index finger and apply it to the inside of your glasses lens, positioning it close to nose and in the lowest part with the curve of the OPTX 20/20 lens following the curve of your glasses.
    (the OPTX lenses can easily be adjusted for about 10 minutes, as long as they are wet.)
  4. With a dry lent-free cloth, push delicately on the OPTX 20/20 lens in order to push out any excess water
  5. Repeat this step with the second lens
  6. For regular use, you can use your glasses in about a half-hour. But for dive masks or any under-water use, wait 24 hours.

The dry OPTX 20/20 lenses remain attached by molecular action.
You can remove them pulling up at one edge.

IMPORTANT

  • For dive masks, you must let them set for 24 hours before using.
  • In case your lenses are too big for your glasses and they interfere with your long-range vision, you can cut them simply with scissors in the curved part at the bottom. 
  • Do not use solvents to clean OPTX 20/20 lenses - use only mild detergent and water

Suggested Retail Price £32.00