JB Fashions - Spectacle frame manfacturers

Optx 20/20


Select to enlarge

Options available

Product description:

READING LENSES are soft, pliable plastic lenses shaped in a half-moon. This ultra-thin design clings to the inside of your sunglasses through molecular attraction. No adhesives are needed and these flexible lenses leave no residue. They are instantly installed with water and may be removed or reinstalled at any time you choose.

Powers available:

  • +1.25            
  • +1.50           
  • +1.75     
  • +2.00     
  • +2.50     
  • +3.00     

Instructions to Apply OPTX 20/20 Lenses to any type of glasses, or safety or dive mask. 

  1. Make sure your hands are very clean and free of oils. Wash the OPTX 20/20 lenses and your glasses with soap and water.
  2. Put a small drop of water on the inside of the lenses of your glasses or mask
    (where the OPTX 20/20 lenses will be applied)
  3. Take one OPTX lens between your thumb and index finger and apply it to the inside of your glasses lens, positioning it close to nose and in the lowest part with the curve of the OPTX 20/20 lens following the curve of your glasses.
    (the OPTX lenses can easily be adjusted for about 10 minutes, as long as they are wet.)
  4. With a dry lent-free cloth, push delicately on the OPTX 20/20 lens in order to push out any excess water
  5. Repeat this step with the second lens
  6. For regular use, you can use your glasses in about a half-hour. But for dive masks or any under-water use, wait 24 hours.

The dry OPTX 20/20 lenses remain attached by molecular action.
You can remove them pulling up at one edge.


  • For dive masks, you must let them set for 24 hours before using.
  • In case your lenses are too big for your glasses and they interfere with your long-range vision, you can cut them simply with scissors in the curved part at the bottom. 
  • Do not use solvents to clean OPTX 20/20 lenses - use only mild detergent and water

Suggested Retail Price £32.00